Skip to content
  • Call Us: +1 (732) 792-1221 NJ Office or +1 (610) 404-3580 PA Office
  • About
  • Our Team
  • Dealer Portal
    • Manufacturer Information
    • Pricesheets
  • My Account
    • No products in the cart.

SigmetSigmet
  • Menu
  • Home
  • Shop
  • Line Card
  • FREE MONEY!
  • New Products
  • News
    • Sigmet News
    • Manufacturer News
  • Galleries
  • Video
  • Contact
    • ×
Home / Pro X Stands / ProX Stands

10ft DJ Stage Lighting Truss

ProX T-LS31M 10ft DJ Stage Lighting Truss

The Sigmet Corporation online store is available to members only. To become a reseller, feel free to contact us, for more information.
SKU: 10165|741459000000 Categories: Pro X Stands, ProX Stands
Categories
  • DJ Facades and Scrims (34)
    • DJ Facades (8)
    • Facade Scrims (26)
  • Pro X Bags (29)
    • ProX Bags (29)
  • Pro X Cables and Accessories (330)
    • Cable Accessories-Connectors (6)
    • Gaffer Tape (11)
    • ProX Cables (311)
    • Single Interconnect (2)
  • Pro X Cases and Accessories (563)
    • Case Accessories (6)
    • Control Tower DJ Stand by ZCASE® (4)
    • Control Tower™ Faceplates (2)
    • Digital Controller Cases (1)
    • Flip-Ready™ Hydraulic Cases by ZCase® (15)
    • Laptop Stands & Trays (1)
    • Mobile DJ Cases (4)
    • Mobile Workstations (1)
    • ProX Cases (529)
  • Pro X Stands (129)
    • ProX Stands (108)
    • Speaker Stands & Mounts (1)
    • Stand Accessories (8)
    • Table & Stand Covers (12)
  • Staging and Accessories (67)
    • LUMOStage™ (4)
    • Stage Accessories (4)
    • Stages (59)
  • Truss and Accessories (274)
    • 12" Truss Scrim Sleeves (22)
    • All Truss Accessories (3)
    • Corner Junction Blocks (2)
    • F32 Conical I-Beam Truss 2mm (4)
    • Fantek® Lifting Towers (7)
    • Ground Support (4)
    • Lighting Truss & Crankstands (2)
    • ProX Truss (222)
    • Rapid Grid™ System (1)
    • Top & Base Plates (7)
  • X Static Lighting (82)
    • DMX (2)
    • LED Lighting (2)
    • Lighting Controllers (2)
    • Mirror Ball & Pin Spots (3)
    • Special Effects & Fog Machines (1)
    • UNO Laser (4)
    • Xstatic Pro Lighting (71)
  • Description
  • Additional information

T-LS31M

ProX T-LS31M lighting stands are a tough yet portable lighting solution that is ideal for traveling DJs, artists, performers, nightclubs or stage shows, constructed specifically with top-tier safety and performance in mind. ProX T-LS31M is built from metal components that will outlast any other lighting stand. This trussing system offers easy set-up and high stability for your professional equipment. It can also be used as a mounting system for a large format projector screen. It comes with two tripods that telescope to 12.5 feet, featuring two locking grooved pins. Also included are two T-bars with four mounting points each and two, five-foot trusses that securely lock together to create a ten-foot wide span, or be used separately. 

SAFETY INSTRUCTIONS
To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule.  Observe all warnings and usage instructions in the full manual. 

Basic Usage:

  1. Ensure that the stand is positioned on a hard stable surface, in a suitable location, on firm ground and clear of overhead obstacles.
  2. Stabilize legs before lifting the tower or any load.
  3. When outdoors, secure the tower with braces or cables, in the case of wind.

Safety Notes:

  1. Loading on truss and stands should comply with rated weights.
  2. Lock all the safety mechanisms (safety pins, knobs)
  3. Loads must be centered & balanced on each lifting unit.
  4. Safety cables or chains must be installed on each item attached to the unit.
  5. Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
  6. During transport, close all the sections and and tighten tube clamps
  7. Do not attempt to move the stand when loaded or in an extended position.

Service Notes:

  1. Servicing and repairs must be made by qualified persons.
  2. Telescopic masts must be inspected before each use. Any damaged parts must be replaced immediately.

   


  • Pro X Stands T-LS31M All Metal 10 ft lighting Truss
  • T-Bar stand reaches up to 12 ft high
  • 10 ft. Portable Lighting Stand Truss
  • 2 Interlocking 5 Foot Sections Of “I” Truss
  • One more 5ft. “I” truss section can be added safely (optional)
  • Hanging bolts included
  • 200 lbs Capacity Evenly Distributed
  • Non-slip rubber feet
  • Aluminum Tubing Diameter: 1 1/2″
  • All metal connectors (never breaks)
  • Package dimensions: 55 x 12 x 11 inches

1 1/2″ Diameter Trussing


Weight 56 lbs
Dimensions 58 × 13 × 12 in
About us

Sigmet offers its principals over 80 years of combined experience in the field of Manufacturers Representation.

Sigmet
  • About
  • Our Team
  • Manufacturer News
  • Sigmet News
Quick Links
  • Dealer Support
  • Line Card
  • Galleries
  • Shop
More Info
  • Privacy Policy
  • Return Policy
  • Terms Of Use
Copyright 2023 © Sigmet Corporation. All rights reserved.
  • Home
  • Shop
  • Line Card
  • FREE MONEY!
  • New Products
  • News
    • Sigmet News
    • Manufacturer News
  • Galleries
  • Video
  • Contact
  • About
  • Our Team
  • Dealer Portal
    • Manufacturer Information
    • Pricesheets
  • My Account

Login

Lost your password?